Note: this AutoCAD file is stand-alone, but is also required as an Xref in the AutoCAD drawing below.
The Millett Hybrid MAXed is designed to be used with the popular Hammond Mfg 1455 series enclosures,
specifically, the Hammond 1455T1601. Below are drawings and templates to assist you in installing a populated
MAX PCB into the Hammond case. Of course, this is only one solution - many others are possible.
Millett MAX Casework Drawings - Endplate Templates (right-click to download the following):
Note: this AutoCAD file combines all templates into one drawing, but requires the
PCB AutoCAD drawing above as an Xref.
NOTE: The PDF files are probably the best to use in printing out drilling templates for the MAX. However, with the
multitude of printers that exist, it is impossible to guarantee that the templates will print to scale in every case.
The graphic scales are included to assist in this task, however. Adjust your printing scale until the graphic scales
are the correct size.
Also, please note that the production board added an inlet fuse. If you choose to use this (optional), there is a conflict with the walwart jack as shown on the backplate template.
Millett MAX Casework Drawings - Top Plate & Bottom (right-click to download the following):